Prilikom isključivanja virtualnog stroja u Hyper-V- u , ako dobivate  Aplikacija je naišla na pogrešku dok je pokušavala promijeniti^{(The application encountered an error while attempting to change the state )} pogrešku stanja, evo kako to možete popraviti. Pojavljuje se kada se radnja izvodi u pozadini, a vi između njih kliknete gumb  Isključi ^{(Turn Off )} . Evo kako možete zaobići ovu pogrešku i isključiti virtualni stroj u Windows 11/10 .

The application encountered an error while attempting to change the state of ‘[virtual-machine-name]’.
Failed to stop.
‘Virtual-machine-name’ failed to stop: The device is not ready for use. (0x800710DF). (Virtual Machine ID unique-numbers)

Ako kliknete  gumb Zatvori ^(Close ) i pokušate ga ponovno isključiti, dobit ćete istu pogrešku. To je zato što neke usluge rade u pozadini, a virtualni stroj se ne može isključiti dok se te usluge ne zatvore. Osim ponovnog pokretanja računala, postoje dva načina da se riješite ovog problema. Prvo, možete zatvoriti Hyper-V Manager pomoću upravitelja zadataka^{(Task Manager)} . Drugo, možete zaustaviti sve pozadinske usluge s  ploče Usluge  .^(Services )

Aplikacija je naišla na pogrešku prilikom pokušaja promjene stanja

Da biste popravili Aplikacija je naišla na pogrešku dok je pokušavala promijeniti stanje, slijedite ove korake:

1. Završite zadatak Hyper-V Managera^{(Hyper-V Manager)} pomoću upravitelja zadataka^{(Task Manager)}
2. Zaustavite sve Hyper-V usluge

Da biste saznali više o ovim koracima, nastavite čitati.

Popravi Uređaj nije spreman za upotrebu (0x800710DF) Pogreška virtualnog^(Virtual) stroja

1] Završite zadatak Hyper-V Managera^{(End Hyper-V Manager)} pomoću upravitelja zadataka^{(Task Manager)}

Kad god pokrenete program, on se pojavljuje u Upravitelju zadataka^{(Task Manager)} . Možete koristiti ovaj uslužni program za okončanje zadatka Hyper-V Manager u ^{(Hyper-V Manager)}Windows 11/10 . Postoji više načina za  otvaranje Task Managera^{(open Task Manager)} , ali možete pritisnuti  Win+X  i odabrati opciju  Task Manager  da biste ga brzo otvorili. Nakon toga pronađite  Microsoftovu upravljačku konzolu ^{(Microsoft Management Console )} i proširite je da odaberete  Hyper-V Manager .

Zatim kliknite  gumb Završi zadatak ^{(End task )} .

Sada možete promijeniti postavke u Hyper-V Manageru^{(Hyper-V Manager)} kao i obično.

2] Zaustavite sve Hyper-V usluge

Nekoliko usluga radi u pozadini za Hyper-V Manager , a svaka od njih je odgovorna za nešto ili drugo. Stoga, ako zaustavite te usluge, možete zatvoriti Hyper-V Manager ili isključiti virtualni stroj koji ne reagira. Za to učinite sljedeće:

• Potražite  usluge^(services)  u okviru za pretraživanje na traci zadataka^(Taskbar) i kliknite na rezultat pretraživanja.
• Saznajte sve usluge povezane s Hyper-V .
• Dvaput kliknite na svaki od njih.
• Kliknite  gumb Stop  .
• Kliknite na  gumb OK  .
• Zatvorite Hyper-V Manager i virtualni stroj.

Za svoje informacije, morate potražiti ove usluge:

• HV host usluga
• Hyper-V usluga razmjene podataka
• Hyper-V sučelje usluge za goste
• Hyper-V usluga isključivanja gostiju
• Hyper-V usluga otkucaja srca
• Usluga Hyper-V host računala
• Izravna usluga Hyper-V PowerShell
• Hyper-V usluga virtualizacije udaljene radne površine^{(Remote Desktop Virtualization Service)}
• Hyper-V usluga sinkronizacije vremena^{(Time Synchronization Service)}
• Hyper-V upravljanje virtualnim strojem
• Hyper-V Volume Shadow Copy Requestor

Zašto ne mogu isključiti Hyper-V?

Budući da brojne usluge i procesi rade u pozadini cijelo vrijeme, ako još nisu zatvoreni, ne možete isključiti Hyper-V virtualni stroj. Da biste isključili Hyper-V virtualni stroj, morate zatvoriti sve pokrenute usluge koje se kontinuirano izvode u pozadini pomoću gore navedene metode.

Pročitajte^(Read) : Hyper-V virtualni stroj se vrlo sporo pokreće^{(Hyper-V virtual machine very slow to start)} ?

Kako mogu prisiliti Hyper-V VM da se isključi?

Ako ne možete isključiti Hyper-V virtualni stroj i želite ga prisilno isključiti, morate zaustaviti sve usluge na  ploči usluge  . ^(Services )Ako ne želite proći kroz taj dugotrajan proces, možete otvoriti Task Manager i završiti zadatak Hyper-V Managera^{(Hyper-V Manager)} .

Kako prisilno zatvoriti virtualni stroj?

Napuštanje virtualnog stroja i Hyper-V Managera^{(Hyper-V Manager)} ista je stvar u Windows 10/11 . Morate koristiti Upravitelj zadataka^{(Task Manager)} za prisilno zatvaranje virtualnog stroja u Hyper-V . Međutim, ako  iz bilo kojeg razloga ne možete otvoriti Task Manager  , jedino je rješenje ponovno pokretanje računala.

Pročitajte:  ^(Read: )Sigurnosne postavke su zasivljene u Hyper-V.^{(Security settings are grayed out in Hyper-V.)}

The application encountered an error while attempting to change the state

While turning off a virtual machine in Hyper-V, if you are getting The application encountered an error while attempting to change the state error, here is how you can fix it. It appears when an action is running in the background, and you are clicking the Turn Off button in between. Here is how you can bypass this error and shut down a virtual machine in Windows 11/10.

The application encountered an error while attempting to change the state of ‘[virtual-machine-name]’.
Failed to stop.
‘Virtual-machine-name’ failed to stop: The device is not ready for use. (0x800710DF). (Virtual Machine ID unique-numbers)

If you click the Close button and try to shut it down again, you will get the same error. That is because some services are running in the background, and the virtual machine cannot be shut down until those services are closed. Apart from restarting your computer, there are two methods to get rid of this problem. One, you can close the Hyper-V Manager using Task Manager. Two, you can stop all the background services from the Services panel.

The application encountered an error while attempting to change the state of

To fix The application encountered an error while attempting to change the state of, follow these steps:

1. End Hyper-V Manager task using Task Manager
2. Stop all Hyper-V services

To learn more about these steps, continue reading.

Fix The device is not ready for use (0x800710DF) Virtual machine error

1] End Hyper-V Manager task using Task Manager

Whenever you start a program, it appears in the Task Manager. You can use this utility to end the Hyper-V Manager task in Windows 11/10. There are multiple ways to open Task Manager, but you can press Win+X and select the Task Manager option to open it quickly. After that, find out Microsoft Management Console and expand it to select Hyper-V Manager.

Next, click the End task button.

Now, you can change settings in Hyper-V Manager as usual.

2] Stop all Hyper-V services

Several services run in the background for Hyper-V Manager, and each one of them is responsible for something or other. Therefore, if you stop those services, you can close Hyper-V Manager or shut down the unresponsive virtual machine. For that, do the following:

• Search for services in the Taskbar search box and click on the search result.
• Find out all the Hyper-V related services.
• Double-click on each of them.
• Click the Stop button.
• Click on the OK button.
• Close the Hyper-V Manager and virtual machine.

For your information, you have to look for these services:

• HV Host Service
• Hyper-V Data Exchange Service
• Hyper-V Guest Service Interface
• Hyper-V Guest Shutdown Service
• Hyper-V Heartbeat Service
• Hyper-V Host Computer Service
• Hyper-V PowerShell Direct Service
• Hyper-V Remote Desktop Virtualization Service
• Hyper-V Time Synchronization Service
• Hyper-V Virtual Machine Management
• Hyper-V Volume Shadow Copy Requestor

Why can’t I turn off Hyper-V?

As numerous services and processes run in the background all the time, if those are not closed yet, you cannot turn off a Hyper-V virtual machine. To turn off Hyper-V virtual machine, you have to close all the running services that run continuously in the background using the method mentioned above.

Read: Hyper-V virtual machine very slow to start?

How do I force a Hyper-V VM to shut down?

If you cannot shut down Hyper-V virtual machine and want to force shut down it, you have to stop all the services from the Services panel. If you don’t want to go through that lengthy process, you can open Task Manager and end the Hyper-V Manager task.

How do you force quit a virtual machine?

Quitting a virtual machine and Hyper-V Manager is the same thing on Windows 10/11. You have to use the Task Manager to force quit a virtual machine in Hyper-V. However, if you are unable to open Task Manager due to any reason, restarting your computer is the only solution.

Read: Security settings are grayed out in Hyper-V.

Related posts

• Hyper-V je naišao na pogrešku prilikom učitavanja konfiguracije virtualnog stroja

• Microsoft Hyper-V Server je besplatan za neograničenu procjenu

• Kako uvesti, izvesti ili klonirati virtualne strojeve u Hyper-V

• Kako instalirati Windows 11 pomoću Hyper-V u sustavu Windows

• Kako pretvoriti VHDX datoteku u VHD koristeći PowerShell

• Raw-mode je nedostupan zahvaljujući Hyper-V VirtualBox pogreški

• Recenzija Acer Aspire V Nitro VN7-592G Black Edition - elegantno, prijenosno igranje

• Hyper-V je naišao na pogrešku pri kopiranju virtualnih tvrdih diskova u odredišnu mapu

• Upravljanje virtualnim strojem nije prisutno na ovom stroju

• Hyper-V nije pronašao virtualne strojeve za uvoz s lokacije

• Sigurnosne postavke su zasivljene u Hyper-V

• Hyper-V se ruši ili zamrzava 5 u Windows 11/10 računalu

• Recenzija Acer Aspire V 17 Nitro Black Edition - Što ažuriranje za 2017. poboljšava?

• Popravite Hyper-V virtualni stroj koji je zapeo u stanju zaustavljanja

• Kako onemogućiti Microsoft Hyper-V u sustavu Windows 11/10

• Kako omogućiti TPM u Hyper-V za instalaciju sustava Windows 11

• Hyper-V se ne može instalirati na Windows 11/10

• Hyper-V virtualni stroj se vrlo sporo pokreće? Ubrzajte Hyper-V!