Periodično ažuriranje operativnog sustava neophodno je kako bi sustav bio siguran. Međutim, problem instalacije sustava Windows 10^{(Windows 10)} zapeo na 46 posto pretvara ga u dugotrajan proces. Ako se i vi suočavate s navedenim problemom i tražite rješenje, na pravom ste mjestu. Donosimo savršen vodič koji će vam pomoći riješiti problem s Fall Creators Update - om. Dakle, nastavite čitati!

Kako popraviti instalaciju sustava Windows 10 koja je zapela na 46 posto problema^{(How to Fix Windows 10 Installation Stuck at 46 Percent Issue)}

U ovom smo odjeljku sastavili popis metoda za rješavanje problema s Fall Creators Update koji je zapeo na 46 posto i rasporedili ih prema udobnosti korisnika. No prije nego što se izravno udubite u metode, provjerite ova osnovna rješenja za rješavanje problema navedena u nastavku:

• Pobrinite se da imate aktivnu internetsku vezu^{(active internet connection)} kako biste ažurirali svoj Windows i preuzeli datoteke bez napora.
• Onemogućite ^{(Disable )}antivirusni softver treće strane^{(third-party antivirus software)} instaliran u vašem sustavu i odspojite VPN klijent,^{(VPN client,)} ako postoji.
•  Provjerite ima li dovoljno prostora na disku C:^{(ufficient space in C: Drive )} za preuzimanje datoteka ažuriranja.
• Koristite Windows Clean Boot da analizirate uzrokuju li problem neželjene aplikacije ili programi trećih strana. Zatim ih deinstalirajte.

Metoda 1: Pokrenite alat za rješavanje problema Windows Update^{(Method 1: Run Windows Update Troubleshooter)}

Rješavanje problema sa sustavom jedna je od jednostavnih metoda za rješavanje problema s instalacijom sustava Windows 10^{(Windows 10)} . Ako tada riješite problem sa svojim sustavom, dogodit će se sljedeći popis radnji:

• ^{(Windows Update Services)}Sustav je isključio Windows Update Services .
• C:\Windows\SoftwareDistribution preimenovana je u C C:\Windows\SoftwareDistribution.old
• Sva predmemorija za preuzimanje^{(download cache)} prisutna u sustavu se briše.
• Konačno, Windows Update Service se ponovno pokreće^{(Update Service is rebooted)} .

Stoga slijedite dolje navedene upute za pokretanje automatskog^(Automatic) alata za rješavanje problema u svom sustavu:

1. Pritisnite tipku  Windows i upišite Control Panel u traku za pretraživanje, kao što je prikazano.

2. Otvorite  upravljačku ploču^{(Control Panel)} iz rezultata pretraživanja.

3. Sada potražite opciju Troubleshooting pomoću trake za pretraživanje i kliknite na nju.

4. Zatim kliknite na opciju View all u lijevom oknu.

5. Pomaknite se prema dolje i odaberite Windows update kao što je prikazano.

6. Zatim odaberite Napredno^{(Advanced )} kao što je dolje prikazano.

7. Ovdje provjerite je li označen okvir pored Automatski primijeni popravke^{(Apply repairs automatically)} i kliknite na Sljedeće^(Next) .

8. Slijedite upute na zaslonu^{(on-screen instructions)} kako biste dovršili postupak rješavanja problema.

Većinu vremena, proces rješavanja problema će riješiti problem zaglavljenog ažuriranja Fall Creatora. Nakon toga^(Thereafter) pokušajte ponovno pokrenuti ažuriranje sustava Windows .^(Windows)

Napomena:^(Note:) Alat za rješavanje problema obavještava vas može li identificirati i riješiti problem. Ako kaže da ne može identificirati problem, isprobajte ostale metode o kojima se raspravlja u ovom članku.

Metoda 2: Izvedite čisto pokretanje^{(Method 2: Perform Clean Boot)}

Slijedite dolje navedene korake kako biste riješili probleme u vezi s instalacijom ^{(Installation)}sustava Windows 10^{(Windows 10)} koja je zapela na 46 posto.

Napomena:^(Note:) Obavezno se prijavite kao administrator da biste izvršili čisto podizanje sustava Windows.

1. Da biste pokrenuli dijaloški okvir Pokreni^{(Run dialog box)} , zajedno pritisnite tipke Windows + R keys

2. Unesite naredbu msconfig i kliknite na OK .

3. Zatim prijeđite na karticu Usluge^(Services) u prozoru Konfiguracija^{(System Configuration)} sustava.

4. Označite okvir pored Sakrij sve Microsoftove usluge^{(Hide all Microsoft services)} i kliknite gumb Onemogući sve^{(Disable all)} kako je označeno.

5. Sada se prebacite na karticu Startup^{(Startup tab)} i kliknite vezu na Open Task Manager kao što je prikazano u nastavku.

6. Prijeđite na karticu Startup u prozoru Task Manager .

7. Zatim odaberite nepotrebne zadatke pokretanja^{(unrequired startup tasks)} i kliknite Onemogući^(Disable) u donjem desnom kutu, kao što je istaknuto

Na primjer, pokazali smo kako onemogućiti Skype kao startup stavku.

8. Izađite iz upravitelja zadataka^{(Task Manager)} i kliknite na Apply > OK u prozoru Konfiguracija^{(System Configuration)} sustava da biste spremili promjene.

9. Konačno, ponovno pokrenite ^(restart) računalo^{(your PC)} .

Također pročitajte: ^{(Also Read:)} Izvedite čisto pokretanje u sustavu Windows 10^{(Perform Clean boot in Windows 10)}

Metoda 3: Preimenujte distribucijsku mapu softvera^{(Method 3: Rename Software Distribution Folder)}

Također možete riješiti zaglavljeni problem Fall Creators Update preimenovanjem mape SoftwareDistribution na sljedeći način:^{(SoftwareDistribution)}

1. Upišite cmd u traku za pretraživanje sustava Windows^{(Windows search)} . Kliknite Pokreni kao administrator^{(Run as administrator)} za pokretanje naredbenog retka.

2. Upišite sljedeće naredbe jednu po jednu i pritisnite Enter nakon svake naredbe.

net stop bits
net stop wuauserv
net stop cryptSvc
net stop msiserver

3. Sada upišite naredbu danu u nastavku da biste preimenovali^{(rename the)}  mapu Software Distribution i pritisnite ^{(Software Distribution)}Enter .

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

4. Opet^(Again) izvršite dane naredbe za resetiranje mape Windows i preimenujte je.

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Ponovno pokrenite sustav^{(Restart your system)} i provjerite je li problem zaglavljenog instaliranja Windows 10 sada riješen.

Također pročitajte: ^{(Also Read: )}Kako popraviti grešku 0x80300024^{(How to Fix Error 0x80300024)}

Metoda 4: Pokrenite SFC & DISM skeniranje
^{(Method 4: Run SFC & DISM Scan )}

Korisnici sustava Windows 10 mogu automatski, skenirati i popraviti svoje sistemske datoteke pokretanjem System File Checker . To je ugrađeni alat koji također omogućuje korisniku brisanje oštećenih datoteka.

1. Pokrenite naredbeni redak^{(Command Prompt)} s administrativnim privilegijama, kao i ranije.

2. Upišite sfc /scannow i pritisnite tipku Enter^{(Enter key)} .

3. Provjera sistemskih datoteka^{(System File Checker )} će započeti svoj proces. Pričekajte ^(Wait)Verification 100 % completed izjavu za provjeru.

4. Sada upišite  Dism /Online /Cleanup-Image /CheckHealth i pritisnite Enter .

Napomena:^(Note:) Naredba CheckHealth utvrđuje postoji li oštećena lokalna slika sustava Windows 10^{(Windows 10)} .

5. Zatim upišite naredbu danu u nastavku i pritisnite Enter.

DISM.exe /Online /Cleanup-Image /ScanHealth

Napomena: naredba ^(Note:) ScanHealth izvodi naprednije skeniranje i utvrđuje ima li slika OS-a ikakvih problema.

6. Zatim izvršite DISM /Online /Cleanup-Image /RestoreHealth , kao što je prikazano. Automatski će popraviti probleme.

7. Ponovno pokrenite računalo^{(Restart your PC)} i provjerite je li navedeni problem riješen ili ne.

Metoda 5: Oslobodite prostor na disku^{(Method 5: Free-up Disk Space)}

Windows ažuriranje neće biti dovršeno ako nemate dovoljno prostora na disku u vašem sustavu. Stoga pokušajte izbrisati neželjene aplikacije i programe pomoću upravljačke ploče^{(Control Panel)} :

1. Idite na upravljačku ploču^{(Control Panel)} implementirajući korake navedene u 1. metodi^{(Method 1)} .

2. Promijenite opciju View by  u Male ikone^{(Small icons)} i kliknite na Programs and Features, kao što je prikazano.

3. Ovdje na popisu odaberite rarely used applications/programs i kliknite na Deinstaliraj,^{(Uninstall, )} kako je istaknuto.

4. Sada potvrdite upit klikom na Deinstaliraj.^(Uninstall.)

5. Ponovite isto za sve takve programe i aplikacije.

Također pročitajte: ^{(Also Read:)} Što je Windows 10 Boot Manager?^{(What is Windows 10 Boot Manager?)}

Method 6: Update/ Reinstall Network Driver

Da biste riješili problem zastoja instalacije ^{(Installation)}sustava Windows 10^{(Windows 10)} u vašem sustavu, ažurirajte ili ponovno instalirajte upravljačke programe sustava na najnoviju verziju koja je relevantna za pokretač.

Metoda 6A: Ažurirajte mrežni upravljački program^{(Method 6A: Update Network Driver)}

1. Pritisnite tipke Windows + X i odaberite Upravitelj uređaja^{(Device Manager)} , kao što je prikazano.

2. Dvaput kliknite na Mrežni adapteri^{(Network adapters)}  da biste ga proširili.

3. Sada desnom tipkom miša kliknite mrežni upravljački program^{( network driver)}  i kliknite na Ažuriraj upravljački program^{(Update driver)} , kao što je istaknuto.

4. Ovdje kliknite na Automatski traži upravljačke programe^{(Search automatically for drivers )} kako biste automatski preuzeli i instalirali najnoviji upravljački program.

Ponovno pokrenite računalo i provjerite je li problem s ažuriranjem Fall Creators koji je zapeo na 46 posto riješen.

Metoda 6B: Ponovno instalirajte mrežni upravljački program^{(Method 6B: Reinstall Network Driver)}

1. Pokrenite Upravitelj uređaja^{(Device Manager )} i proširite Mrežni prilagodnici^{( Network adapters)} , kao ranije.

2. Sada desnom tipkom miša kliknite mrežni upravljački program^{(network driver)} i odaberite Deinstaliraj uređaj^{(Uninstall device)} .

3. Na zaslonu će se prikazati upozorenje. Označite okvir Izbriši softver upravljačkog programa za ovaj uređaj^{(Delete the driver software for this device)} i kliknite Deinstaliraj^(Uninstall) .

4. Preuzmite i instalirajte upravljačke programe putem web-mjesta proizvođača. Kliknite ovdje^{(Click here)} za preuzimanje Intel mrežnih upravljačkih programa.^{(download Intel Network Drivers.)}

5. Zatim slijedite upute na zaslonu^{(on-screen instructions)} da biste dovršili instalaciju i pokrenuli izvršnu datoteku.

Na kraju, provjerite je li problem sada riješen.

Metoda 7: Onemogućite vatrozid Windows Defender^{(Method 7: Disable Windows Defender Firewall)}

Neki su korisnici izvijestili da je instalacija^{(Installation)} sustava Windows 10 zastala na 46 posto problema nestala kada je vatrozid Windows Defender^{(Windows Defender Firewall)} isključen. Slijedite ove korake da biste ga onemogućili:

1. Pokrenite upravljačku ploču^{(Control Panel)} prema uputama u metodi 1.^{(Method 1.)}

2. Odaberite opciju  Prikaz prema ^{(View by)}kategoriji^(Category) i kliknite na Sustav i sigurnost^{(System and Security )} kao što je prikazano u nastavku.

3. Sada kliknite na opciju Windows Defender Firewall  .

4. U lijevom oknu odaberite Uključi ili isključi vatrozid Windows Defender .^{(Turn Windows Defender Firewall on or off)}

5. Sada odaberite opciju Isključi vatrozid Windows Defender (ne preporučuje se)^{(Turn off Windows Defender Firewall (not recommended))} u svim mrežnim postavkama, kao što je prikazano u nastavku.

6. Ponovno pokrenite^(Reboot) svoje računalo sa sustavom Windows 10.

Također pročitajte: ^{(Also Read:)} Kako blokirati ili deblokirati programe u vatrozidu Windows Defender^{(How to Block or Unblock Programs In Windows Defender Firewall)}

Metoda 8: Privremeno onemogućite antivirusni program^{(Method 8: Disable Antivirus Temporarily)}

Ako želite privremeno onemogućiti svoj antivirusni program, slijedite korake navedene u ovoj metodi.

Napomena:^(Note:) Koraci se mogu razlikovati od softvera do softvera. Ovdje je Avast Free Antivirus uzet kao primjer.

1. Dođite do ikone Antivirus^{(Antivirus icon)} na programskoj traci^(Taskbar) i kliknite desnom tipkom miša na nju.

2. Sada odaberite opciju antivirusnih postavki^{(antivirus settings)} . Primjer: za Avast antivirus kliknite na Avast shields control.

3. Privremeno onemogućite Avast^{(Temporarily disable Avast)} koristeći sljedeće opcije:

• Onemogućite na 10 minuta
• Onemogućite na 1 sat
• Onemogućite dok se računalo ne pokrene ponovo
• Trajno onemogućiti

4. Odaberite opciju^{(Choose the option)} kako vam odgovara i provjerite je li problem Fall Creators Update sada riješen.

Preporučeno:^{(Recommended:)}

• 5 načina za popravak Steam klijenta^{(5 Ways to Repair Steam Client)}
• Kako završiti zadatak u sustavu Windows 10^{(How to End Task in Windows 10)}
• Popravite pogrešku DISM 87 u sustavu Windows 10^{(Fix DISM Error 87 in Windows 10)}
• Kako izbrisati Win Setup datoteke u sustavu Windows 10^{(How to Delete Win Setup Files in Windows 10)}

Nadamo se da je ovaj vodič bio od pomoći i da ste uspjeli popraviti ^(fix) instalaciju sustava Windows 10 koja je zapela ^{(Windows 10 installation stuck)} na problemu od 46 posto^{(at 46 percent issue)} . Javite nam koja vam je metoda najbolja. Također, ako imate bilo kakva pitanja/prijedloge u vezi s ovim člankom, slobodno ih ostavite u odjeljku za komentare u nastavku.

8 Ways to Fix Windows 10 Installation Stuck

Updating your operating system periodically is essеntial to keep the system safe. However, the issue of Windows 10 installation stuck at 46 pеrcent turns it into a lengthy process. If you are also facing the said іssue and are looking fоr a solution, you are at the right place. We brіng a perfect guide that will help yоu solve the Fall Creators Update issue. So, continue reаding!

How to Fix Windows 10 Installation Stuck at 46 Percent Issue

In this section, we have compiled a list of methods to fix the issue of Fall Creators Update stuck at 46 percent and arranged them according to user convenience. But before delving into the methods directly, check these basic troubleshooting solutions listed below:

• Make sure to have an active internet connection to update your Windows and download the files effortlessly.
• Disable third-party antivirus software installed in your system, and disconnect the VPN client, if any.
•  Check if there’s sufficient space in C: Drive to download the update files.
• Use Windows Clean Boot to analyze whether any unwanted third-party applications or programs are causing the problem. Then, uninstall them.

Method 1: Run Windows Update Troubleshooter

Troubleshooting the system is one of the easy methods to fix Windows 10 installation stuck issue. If you troubleshoot your system then, the following list of actions will take place:

• Windows Update Services is shut down by the system.
• The C:\Windows\SoftwareDistribution folder is renamed to C:\Windows\SoftwareDistribution.old
• All the download cache present in the system is wiped off.
• Finally, the Windows Update Service is rebooted.

So, follow the instructions listed below to run the Automatic troubleshooter in your system:

1. Hit the Windows key and type Control Panel in the search bar, as shown.

2. Open Control Panel from the search results.

3. Now, search for the Troubleshooting option using the search bar and click on it.

4. Next, click on the View all option in the left pane.

5. Scroll down and select Windows update as depicted.

6. Next, select Advanced as depicted below.

7. Here, ensure that the box next to Apply repairs automatically is checked and click on Next.

8. Follow the on-screen instructions to complete the troubleshooting process.

Most of the time, the troubleshooting process will fix Fall Creator’s update stuck issue. Thereafter, try to run the Windows update again.

Note: The troubleshooter lets you know if it could identify and fix the problem. If it says that it could not identify the issue, try the rest of the methods discussed in this article.

Method 2: Perform Clean Boot

Follow the below-mentioned steps to fix the issues concerning Windows 10 Installation stuck at 46 percent.

Note: Make sure you log in as an administrator to perform Windows clean boot.

1. To launch the Run dialog box, press the Windows + R keys together.

2. Enter the msconfig command, and click on OK.

3. Next, switch to the Services tab in the System Configuration window.

4. Check the box next to Hide all Microsoft services, and click on Disable all button as highlighted.

5. Now, switch to the Startup tab and click the link to Open Task Manager as depicted below.

6. Switch to the Startup tab in the Task Manager window.

7. Next, select the unrequired startup tasks and click Disable from the bottom right corner, as highlighted

For example, we have shown how to disable Skype as a startup item.

8. Exit the Task Manager and click on Apply > OK in the System Configuration window to save the changes.

9. Finally, restart your PC.

Also Read: Perform Clean boot in Windows 10

Method 3: Rename Software Distribution Folder

You can also fix the Fall Creators Update stuck issue by renaming the SoftwareDistribution folder as follows:

1. Type cmd in the Windows search bar. Click on Run as administrator to launch Command Prompt.

2. Type the following commands one by one and hit Enter after each command.

net stop bits
net stop wuauserv
net stop cryptSvc
net stop msiserver

3. Now, type the command given below to rename the Software Distribution folder and hit Enter.

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

4. Again, execute the given commands to reset the Windows folder and rename it.

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

5. Restart your system and check if Windows 10 installation stuck problem is fixed now.

Also Read: How to Fix Error 0x80300024

Method 4: Run SFC & DISM Scan

Windows 10 users can automatically, scan and repair their system files by running System File Checker. It is a built-in tool that also lets the user delete corrupt files.

1. Launch Command Prompt with administrative privileges, as earlier.

2. Type sfc /scannow and press the Enter key.

3. System File Checker will begin its process. Wait for the Verification 100 % completed statement.

4. Now, type  Dism /Online /Cleanup-Image /CheckHealth and hit Enter.

Note: The CheckHealth command determines if there are any corrupt local Windows 10 image.

5. Then, type the command given below and hit Enter.

DISM.exe /Online /Cleanup-Image /ScanHealth

Note: ScanHealth command performs a more advanced scan and determines if the OS image has any problems.

6. Next, execute DISM /Online /Cleanup-Image /RestoreHealth command, as shown. It will repair issues automatically.

7. Restart your PC and check if the said issue is fixed or not.

Method 5: Free-up Disk Space

Windows update will not be completed if you do not have enough disk space in your system. Therefore, try to clear unwanted applications and programs using the Control Panel:

1. Navigate to Control Panel implementing the steps mentioned in Method 1.

2. Change the View by option to Small icons and click on Programs and Features, as shown.

3. Here, select rarely used applications/programs in the list and click on Uninstall, as highlighted.

4. Now, confirm the prompt by clicking on Uninstall.

5. Repeat the same for all such programs & apps.

Also Read: What is Windows 10 Boot Manager?

Method 6: Update/ Reinstall Network Driver

To solve the Windows 10 Installation stuck issue in your system, update or reinstall your system drivers to the latest version with relevance to the launcher.

Method 6A: Update Network Driver

1. Press the Windows + X keys and select Device Manager, as shown.

2. Double-click on Network adapters to expand it.

3. Now, right-click on your network driver and click on Update driver, as highlighted.

4. Here, click on Search automatically for drivers to download and install the latest driver automatically.

Restart your computer and check if the Fall Creators update stuck at 46 percent issue is fixed.

Method 6B: Reinstall Network Driver

1. Launch Device Manager and expand Network adapters, as earlier.

2. Now, right-click on the network driver and select Uninstall device.

3. A warning prompt will be displayed on the screen. Check the box Delete the driver software for this device and click Uninstall.

4. Download and install the drivers through the manufacturer’s website. Click here to download Intel Network Drivers.

5. Then, follow the on-screen instructions to complete the installation and run the executable.

Finally, check if the issue is fixed now.

Method 7: Disable Windows Defender Firewall

Some users reported that Windows 10 Installation stuck at 46 percent issue disappeared when Windows Defender Firewall was turned off. Follow these steps to disable it:

1. Launch Control Panel as instructed in Method 1.

2. Select the View by option to Category and click on System and Security as shown below.

3. Now, click on the Windows Defender Firewall option.

4. Select Turn Windows Defender Firewall on or off from the left pane.

5. Now, select Turn off Windows Defender Firewall (not recommended) option in all network settings, as illustrated below.

6. Reboot your Windows 10 PC.

Also Read: How to Block or Unblock Programs In Windows Defender Firewall

Method 8: Disable Antivirus Temporarily

If you want to disable your antivirus temporarily, follow the steps listed in this method.

Note: The steps may differ from software to software. Here Avast Free Antivirus is taken as an example.

1. Navigate to the Antivirus icon in the Taskbar and right-click on it.

2. Now, select the antivirus settings option. Example: For Avast antivirus, click on Avast shields control.

3. Temporarily disable Avast using the below options:

• Disable for 10 minutes
• Disable for 1 hour
• Disable until computer is restarted
• Disable permanently

4. Choose the option according to your convenience and check if the Fall Creators Update issue is fixed now.

Recommended:

• 5 Ways to Repair Steam Client
• How to End Task in Windows 10
• Fix DISM Error 87 in Windows 10
• How to Delete Win Setup Files in Windows 10

We hope that this guide was helpful and you were able to fix Windows 10 installation stuck at 46 percent issue. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section below.

Related posts

• Kako riješiti problem koji ne radi s mikrofonom u sustavu Windows 10?

• 7 načina da popravite kritični proces koji je umro u sustavu Windows 10

• Popravite Windows 10 koji ne prepoznaje iPhone

• Kako popraviti Avast Update zaglavljen na Windows 10

• Kako popraviti da Windows 10 radi sporo nakon ažuriranja

• Popravite Windows 10 pretraživanje izbornika Start ne radi

• Popravite crnu pozadinu radne površine u sustavu Windows 10

• 3 načina za dodavanje slike albuma u MP3 u sustavu Windows 10

• Popravite Nemogućnost brisanja privremenih datoteka u sustavu Windows 10

• 8 načina da popravite nedostatak zvuka u sustavu Windows 10

• Popravite problem s tipkovnicom koja ne tipka u sustavu Windows 10

• Popravite Windows 10 gumb Start koji ne radi

• Popravite problem s treptanjem pokazivača u sustavu Windows 10

• Popravite kako funkcijske tipke ne rade u sustavu Windows 10

• Kako popraviti skaliranje za zamućene aplikacije u sustavu Windows 10

• Popravite Alt+Tab koji ne radi u sustavu Windows 10

• Popravite Windows 10 Nema instaliranih audio uređaja

• 9 načina da popravite Twitter videozapise koji se ne reproduciraju

• 5 načina za rješavanje problema Steam misli da igra radi

• Popravite probleme s izbornikom Start u sustavu Windows 10