Imate li problema kada pokušavate izbaciti USB uređaj? Ne brinite, u ovom ćemo članku vidjeti 6 različitih načina rješavanja problema s izbacivanjem USB uređaja za masovnu pohranu.^{(Are you facing issues when trying to eject the USB device? Don’t worry in this article we will see 6 different ways to fix Problem Ejecting USB Mass Storage Device.)}

Uređaj za masovnu pohranu ( MSD ) je svaki uređaj za pohranu koji omogućuje pohranu i prijenos velikih količina podataka na računala, poslužitelje i unutar IT okruženja. Neki od primjera MSD - a su floppy disk pogoni, optički pogoni, tvrdi diskovi, trake, vanjski tvrdi diskovi, RAID i USB uređaji za pohranu. Trenutno, MSD daje gigabajte do petabajta^(petabytes) podataka. MSD-ovi^(MSDs) su prijenosni mediji za pohranu koji pružaju interno i eksterno sučelje za pohranu. Unutarnji MSD-ovi^{(Internal MSDs)} općenito se ne mogu ukloniti, dok se vanjski MSD-ovi^(MSDs) mogu lako ukloniti, prenijeti i priključiti na drugo računalo.

Svi mi koristimo uređaje za masovnu pohranu na dnevnoj bazi ili recimo sada opstanak nije moguć bez njih. Kad god želite premjestiti neke od svojih omiljenih filmova s ​​prijenosnog računala svog prijatelja na svoje, podijelite neke važne datoteke u svom uredu ili želite spremiti podatke sa sobom, a zatim upotrijebite uređaj za masovnu pohranu. Vanjski^(External) tvrdi diskovi su prenosivi uređaji laki za korištenje koji mogu dati trenutni kapacitet u bilo kojem trenutku do kojeg želite doći. MSD-ovi^(MSDs) su prenosivi gadgeti jednostavni za korištenje koji mogu dati trenutni kapacitet u kojem god trenutku želite doći do njega.

No ponekad ste se možda suočili s problemom da pokušavate izbaciti uređaj, ali pokazuje da je trenutno u upotrebi.

Da, to je čest problem i najčešće je to zato što koristite neke podatke u obradi s uređaja za pohranu, a u međuvremenu ih pokušavate izbaciti jer je, npr. cijela Steam biblioteka na vašem vanjskom disku, a Steam klijent radi na vašem sustav čita datoteke s njega. Tada vam prikazuje pogrešku koja kaže da je pogon trenutno u upotrebi. Stoga uvijek trebate zatvoriti sve zadatke koji koriste resurse prisutne u uređajima za pohranu. Vaš problem bi trebao biti riješen, ali čak i ako se nakon pokušaja i dalje suočite s problemom, ne biste trebali gubiti živce i svejedno ukloniti uređaj jer on stvara ozbiljniji problem od malog i vjerojatnije ćete se suočiti sa sljedećim problemom:

• Vanjski USB tvrdi disk ne može se otvoriti po drugi put kada ga vratite na računalo.
• Može pokazati da vanjski USB tvrdi disk nije dostupan, pristup je odbijen.
• Vanjski USB tvrdi disk se ne prepoznaje nakon isključivanja bez sigurnog izbacivanja.

Rješavanje problema s izbacivanjem USB uređaja za masovnu pohranu^{(Fix Problem Ejecting USB Mass Storage Device)} . Ovaj uređaj^(Device) je trenutno u upotrebi^(Use)

Pa, ovi problemi zvuče ozbiljno. zar ne? Sada dolaze rješenja koja biste trebali isprobati umjesto da ga ipak uklonite:

Metoda 1: Pronađite aplikaciju pomoću USB podataka u Upravitelju zadataka^{(Method 1: Find the Application using USB Data in Task Manager)}

Ova metoda je jedna od najjednostavnijih. Morate pronaći zadatak koji stvara problem, a zatim ga morate ubiti pomoću upravitelja zadataka.

1. Pritisnite CTRL+ALT+DLT , prikazat će se sigurnosni^{(Security Screen)} zaslon.

2. Odaberite opciju Task Manager .

3. Sada desnom tipkom miša kliknite problematičan zadatak^{(right-click on the problematic task)} i odaberite Završi zadatak. ^{(End Task. )}

A kada završite procesni zadatak, on neće moći stvoriti nikakav problem. Sada ponovno pokušajte izbaciti USB uređaj i možda ćete moći riješiti problem s izbacivanjem USB uređaja za masovnu pohranu.^{(Fix Problem Ejecting USB Mass Storage Device.)}

Metoda 2: Promijenite svojstva diska pomoću upravljanja diskom^{(Method 2: Change Disk Properties using Disk Management)}

1. Pritisnite tipku Windows + R zatim upišite  Diskmgmt.msc i pritisnite Enter da otvorite Upravljanje diskom.

2. Sada desnom tipkom miša kliknite pogon i odaberite Svojstva. ^{( Properties. )}

3. Sada prijeđite na karticu Hardver^(Hardware) i odaberite USB uređaj i kliknite na gumb Svojstva.^{(click on the Properties button.)}

4. Nakon što se otvori prozor Svojstva^(Properties) , vidjet ćete da je prema zadanim postavkama odabrano pravilo brzog uklanjanja . ^{(Quick Removal)}Promijenite ga u politiku boljih performansi^{(Better Performance policy)} i ponovno pokrenite sustav kada se to od vas zatraži.

5. Nakon ponovnog pokretanja, ponovite sve gore navedene korake, ali vratite Politiku uklanjanja na 'Brzo uklanjanje'^{(Removal Policy back to ‘Quick Removal’)} .

6. Ponovno pokrenite računalo da biste spremili promjene.

Sada ponovno pokušajte izbaciti USB uređaj i možda ćete moći riješiti problem s izbacivanjem USB uređaja za masovnu pohranu.^{(Fix Problem Ejecting USB Mass Storage Device.)}

Metoda 3: izbacite USB iz upravljanja diskom^{(Method 3: Eject the USB from Disk Management)}

Ako ne možete izbaciti USB uređaj na tradicionalne metode, uvijek možete koristiti Disk Management za izbacivanje USB uređaja.

1. Pritisnite tipku Windows + R zatim upišite  Diskmgmt.msc i pritisnite Enter da otvorite Upravljanje diskom.

2. Sada odaberite USB koji želite izbaciti.

3. Desnom tipkom miša kliknite^{(Right-click)} taj određeni USB i odaberite Izbaci^(Eject) .

4. Na ovaj način možete jednostavno izbaciti USB putem upravljanja diskom^{(Disk Management)} .

Metoda 4: izbacite USB uređaj u Upravitelju uređaja^{(Method 4: Eject USB device in Device Manager)}

USB uređaje možete izbaciti i pomoću Upravitelja uređaja^{(Device Manager)} . Upravitelj uređaja^{(Device Manager)} je aplet upravljačke ploče u operacijskim sustavima ^{(Control Panel)}Microsoft Windows . Omogućuje korisnicima pregled i kontrolu hardvera spojenog na računalo.

1. Desnom tipkom miša kliknite^{(Right-click)} izbornik Start^{(Start Menu)} ,  a zatim kliknite Upravitelj uređaja.^{(Device Manager.)}

2. Proširite Diskovne pogone, a zatim desnom tipkom miša kliknite^{(right-click)} problematični USB uređaj i odaberite Deinstaliraj.^(Uninstall.)

Sada možete sigurno ukloniti uređaj bez ikakvih problema.

Također pročitajte: ^{(Also read:)} Popravite uređaje za obradu slike koji nedostaju u Upravitelju uređaja^{(Fix Imaging Devices Missing From Device Manager)}

Metoda 5: Koristite Diskpart^{(Method 5: Use Diskpart)}

U ovoj metodi morate koristiti Windows Command Prompt . Izvršite sljedeće naredbe jednu po jednu na povišenom naredbenom retku^{(elevated command prompt)} .

1. Upišite Diskpart u naredbeni redak^{(Command Prompt)} , ovo će pokrenuti uslužni program Diskpart .

2. Zatim upišite  list disk.

3. Zatim upišite volumen popisa. ^{( list volume. )}

4. Vidjet ćete popis svih diskova ili particija na vašem tvrdom disku. Sada ćete vidjeti zaslon koji prikazuje različite volumene zajedno s Ltr .

5. Zatim upišite Select volume 4 (ili bilo koji potrebni volumen u skladu s tim).

6. I na kraju, upišite posljednju naredbu offline disk # ili offline volume #

Napomena:^(Note:) Zamijenite # brojem diska ili volumena.

7. Nakon što se naredba izvrši, to će označiti pogon izvan mreže.^{(mark the drive offline.)}

Metoda 6: Koristite Process Explorer^{(Method 6: Use Process Explorer)}

Process Explorer nevjerojatan je Microsoftov^(Microsoft) softver koji se može koristiti za praćenje problema. Korištenjem ovog softvera možete vidjeti popis resursa koje trenutno koriste procesi, koju datoteku ili program proces trenutno koristi i sprječava korištenje te datoteke ili programa od strane drugog programa. Također možete sortirati procese da vidite koji proces koristi maksimalne CPU resurse i također možete vidjeti koju nit koristi CPU , itd.

1. Preuzmite Process Explorer^{(Download the Process Explorer)}  sa službene stranice Microsofta^(Microsoft) ako ga već nemate.

2. Sada pokrenite^{( run)} izvršnu datoteku dvostrukim klikom^{(double-clicking)} na exe datoteku.

3. Kada se otvori Process Explorer , kliknite na opciju Find^{(click on the Find)} na izborniku.

4. Sada odaberite Find Handle ili DLL^{(Find Handle or DLL )} ispod opcije Find . Pojavit će se prozor za pretraživanje Process Explorera.^{(Process Explorer Search window.)}

5. Upišite slovo pogona za svoj USB uređaj za pohranu^{(Type in the drive letter for your USB Storage device)} i odaberite Traži.^(Search.)

6. Ovo će vam pokazati sve procese koji trenutno koriste podatke s USB -a .

7. Ukinite sve takve procese i sada ponovno pokušajte izbaciti USB . Ovaj put nećete imati problema s izbacivanjem USB uređaja za masovnu pohranu.

Također pročitajte: ^{(Also Read:)} Kako ažurirati upravljačke programe uređaja na Windows 10^{(How to Update Device Drivers on Windows 10)}

Nadajmo^(Hopefully) se da ćete pomoću bilo koje od spomenutih metoda moći riješiti problem s izbacivanjem USB uređaja za masovnu pohranu^{(fix Problem Ejecting USB Mass Storage Device)} , ali ako i dalje imate pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.

6 Ways to Fix Problem Ejecting USB Mass Storage Device

Are you facing issues when trying to eject the USB device? Don’t worry in this article we will see 6 different ways to fix Problem Ejecting USB Mass Storage Device.

A mass storage device (MSD) is any storage device that makes it possible to store and port large amounts of data across computers, servers and within an IT environment. Some of the examples of MSD are floppy disk drives, optical drives, hard disk drives, tape drives, external hard drives, RAID and USB storage devices. Currently, MSD provides gigabytes to petabytes of data. MSDs are portable storage media that provide a storage interface in both the ways internally and externally. Internal MSDs generally can’t be removed, whereas external MSDs can be easily removed, ported and plugged into another computer.

All of us use mass storage devices on a daily basis or let’s just say now survival is not possible without them. Whenever you want to move some of your favorite movies from your friend’s laptop to yours, share some important files in your office or want to save data with yourself then use a mass storage device. External hard drives are transferable, easy-to-use gadgets that can give moment capacity at whatever point you would like to get to it. MSDs are transferable, easy-to-use gadgets that can give moment capacity at whatever point you would like to get to it.

But sometimes you might have faced the problem that you’re trying to eject the device but its showing that it is currently in use.

Yes, it a common problem and most of the times it’s because you are using some data in processing from the storage device and meanwhile that you try to eject that for eg your entire Steam library is on your external drive and the Steam client running on your system is reading files from it. That is when it shows you an error saying that drive is currently in use. So you should always close all the tasks that are using the resources present in the storage devices. Your problem should be solved but even if after trying that you still face the problem then you shouldn’t lose your temper and remove the device anyway because it creates a more serious problem from a small one and you are more likely face following problem:

• The external USB hard drive cannot open for the second time when you put it back on your computer.
• It might show that the external USB hard drive is not accessible, access is denied.
• The external USB hard drive is not recognized after unplugging without safely ejecting.

Fix Problem Ejecting USB Mass Storage Device. This Device Is Currently In Use

Well, these problems sound serious. Isn’t it? Now here comes the solutions you should try instead of removing it anyway:

Method 1: Find the Application using USB Data in Task Manager

This method is one of the simplest ones. You need to find the task which is creating a problem and then needs to kill the task using the task manager.

1. Press CTRL+ALT+DLT, a Security Screen will display.

2. Choose the Task Manager option.

3. Now right-click on the problematic task and select End Task. 

And once you end the process task, it won’t be able to create any issue. Now again try to eject the USB device and you may be able to Fix Problem Ejecting USB Mass Storage Device.

Method 2: Change Disk Properties using Disk Management

1.Press Windows Key + R then type Diskmgmt.msc and press Enter to open Disk Management.

2. Now right-click on the drive and select Properties. 

3. Now switch to the Hardware tab and choose the USB device and click on the Properties button.

4. Once the Properties window opens, you will see that by default Quick Removal policy is selected. Change it to the Better Performance policy and restart your system when prompted.

5. After the restart, perform all the above steps again but set the Removal Policy back to ‘Quick Removal’.

6. Now again, restart your PC to save changes.

Now again try to eject the USB device and you may be able to Fix Problem Ejecting USB Mass Storage Device.

Method 3: Eject the USB from Disk Management

If you can’t eject the USB device using the traditional methods then you can always use Disk Management to eject the USB device.

1.Press Windows Key + R then type Diskmgmt.msc and press Enter to open Disk Management.

2. Now select the USB you want to eject.

3. Right-click on that particular USB and choose Eject.

4.In this way, you can easily eject the USB through Disk Management.

Method 4: Eject USB device in Device Manager

You can also eject the USB devices using Device Manager. Device Manager is a Control Panel applet in Microsoft Windows operating systems. It allows users to view and control the hardware attached to the computer.

1. Right-click on the Start Menu then click on Device Manager.

2. Expand Disk drives and then right-click on the problematic USB device and choose Uninstall.

Now you can safely remove the device without any problem.

Also read: Fix Imaging Devices Missing From Device Manager

Method 5: Use Diskpart

In this method, you need to use the Windows Command Prompt. Execute the following commands one by one on the elevated command prompt.

1. Type Diskpart in the Command Prompt, this will start the Diskpart utility.

2. Then type list disk.

3. Then type list volume. 

4. You will see a list of all the disks or partitions on your hard disk. Now you will see the screen showing different volumes along with the Ltr.

5. Then type Select volume 4 (or any required volume accordingly).

6. And finally, type the last command offline disk # or offline volume #

Note: Replace # with the disk or volume number.

7. Once the command executes, this will mark the drive offline.

Method 6: Use Process Explorer

Process Explorer is an amazing software by Microsoft that can be used to track down problems. Using this software you can see a list of resources that are currently being used by the processes, which file or program the process is currently utilizing and preventing the use of that particular file or program by another program. You can also sort the processes to see which process is utilizing the maximum CPU resources and you can also see which thread is used by CPU, etc.

1. Download the Process Explorer from the official site of Microsoft if you don’t have one already.

2. Now run the executable file by double-clicking on the exe file.

3. One the Process Explorer opens up, click on the Find option from the menu.

4. Now select Find Handle or DLL under the Find option. It will bring up the Process Explorer Search window.

5. Type in the drive letter for your USB Storage device and select Search.

6. This will show you all the processes that are currently utilizing the data from the USB.

7. Kill all such processes and now again try to eject the USB. This time you won’t face any problem ejecting the USB mass storage device.

Also Read: How to Update Device Drivers on Windows 10

Hopefully, using any one of the mentioned methods, you may be able to fix Problem Ejecting USB Mass Storage Device, but if you still have any questions regarding this tutorial then feel free to ask them in the comment section.

Related posts

• Popravite kôd pogreške USB uređaj nije prepoznat 43

• Popravi USB kompozitni uređaj ne može ispravno raditi s USB 3.0

• Zahtjev za popravak deskriptora uređaja nije uspio (nepoznati USB uređaj)

• Popravi MTP USB upravljački program za uređaj nije uspio

• Popravite grešku deskriptora USB uređaja u sustavu Windows 10

• 7 načina da popravite traku zadataka koja se prikazuje na cijelom zaslonu

• Popravi nepoznati USB uređaj u sustavu Windows 10 (Zahtjev za deskriptor uređaja nije uspio)

• Popravi USB ne radi kod pogreške 39

• Popravite problem s upravljačkim programom kontrolera univerzalne serijske sabirnice (USB).

• Popravite veliku potrošnju CPU-a za izolaciju grafikona audio uređaja u sustavu Windows

• 8 načina da popravite veliku upotrebu CPU-a pomoću TiWorker.exe

• Ispravite pogrešku nedodijeljenog prostora na USB pogonu ili SD kartici u sustavu Windows 11/10

• Popravite šifru pogreške mrežnog adaptera 31 u Upravitelju uređaja

• Kako riješiti problem s tunelom Hamachi

• Popravi Računalo se gasi kada je USB uređaj priključen

• Popravite Windows 10 aplikacije koje ne rade (15 načina)

• 4 načina da popravite nestanak pokazivača miša [VODIČ]

• 5 načina za rješavanje problema Steam misli da igra radi

• 9 načina da popravite zaleđenu traku zadataka sustava Windows 10

• Popravi USB se neprestano odvaja i ponovno povezuje